Liberty Continuous pack Side Loader

The Liberty has a patented paddle packer that continuously sweeps the hopper, eliminating the need to stop and pack the load. This eliminates the need to clean out debris from behind the packer sweep.

New materials and welding procedures, better spline design, increased upper and lower bearing size, plus replaceable engineered plastic bearing between lower bearing housing and actuator plate all result in increased paddle life by 2X from previous design.

The packer shaft seal redesign virtually eliminates leaks and is also easily replaceable/serviceable. This new design also keeps the bottom bearing clean, preventing corrosive leachate from getting on the lower bearing, as well as the actuator.

New hard tube lube lines to the upper and lower bearings, assure that grease can easily be applied from ground level.

The Heil Liberty body is constructed of high tensile steel, 1⁄2″ thick in the hopper floor and wall, and 7-gauge 50,000 psi in the body floor. The floor is also supported by 10″ structural channel longmembers

The body of the Liberty is easy to service because all hydraulic cylinders are accessible from ground level. The packer cylinder is also located under the body to protect it from refuse abrasion.

The patented automated Python^® arm can reach up to 9 feet. Able to lift up to up to 800 pounds, the Python arm features cushioned cylinders for smooth action, saving wear and tear on both the lift arm and the chassis. The Python arm’s unique lift geometry enables the arm to routinely replace carts with the lids closed.

The Heil Operate-in-Gear-at-Idle System comes standard on the Liberty. It is designed to help finish routes up to 20% faster, saving up to one gallon of fuel per hour while reducing wear on the lift assembly, chassis, engine, and transmission. Plus, it greatly reduces noise — a benefit to operators and customers alike, especially in residential neighborhoods.

Because there is no packer panel to slide into the body, the need for shoes, guide tracks, guide rails, and internal body parts is eliminated.

Reliable, ergonomic joystick controls deliver smoother performance and enhanced usability. With the AutoLoad system, the operator can reach, grab, lift, dump, and return the arm to the stowed position using only the joystick and two buttons.

The Heil DuraMount Design, used to mount the lift to the chassis frame, reduces the potential for bolt fatigue and provides Service Smart bolt access for easy maintenance.

Made from specially formulated high-strength alloy steel, the Python lift arm’s superior hardened grabber gears virtually eliminate gear wear. The gears are splined to the grabber shafts and can be cycled up to 1,000,000 times with little evidence of wear.

Eight -second lift cycle can save up to four seconds per stop – up to one hour per day. This can add up to more than $15,000 in savings per truck, per year! The Python lift arm’s 9′ reach can slither between cars and other obstacles, making even the most difficult pick-ups possible.

Improved Big Swing design increases paddle life by 2X from previous version. The newly designed packer shaft seal also virtually eliminates leaks. Hard tube lines to upper and lower bearings allow grease to be applied from the ground level.

Select-O-Pack allows an operator to set a predetermined number of lift cycles before the auto-pack sequence is engaged. This feature simplifies operation and helps extend the life of the paddle packer. Combine the optional Extended Tailgate Seal with the Select-O-Pack feature, and you will have the optimal ASL for your organic collection.

The solidly designed lightweight body allows for a more optimal payload, and is ideal for areas with stringent weight restrictions.